The brakes on the bike

Rim brakes squeeze both sides of a bicycle wheel rim brake pads, slowing its rotation. The compressive force is transmitted by means of a rope, stretched from the brake lever, placed on the steering wheel (much less often with the help of a hydraulic line). Disc brakes - more modern than the rim. Yes, outwardly, perhaps, nothing will do so attractive bike as disc brakes. Adjusting the brakes on the bike in the first place will depend on whether the brake system used on your bike. As a rule, the brake does not require frequent adjustment, but there are times when it is absolutely necessary adjustment. If a brake type V-brake, then they should be changed in the case where the braking you hear the sound of metal rubbing. This suggests that the brake pads are worn. By type of hydraulic fluid brakes are divided into working for the brake fluid (Avid, Formula, Hayes) and a special oil (Shimano, Magura, Tektro). Both options have their advantages and disadvantages of small, but definitely recommend any one can not.

Bicycle brake - Wikipedia

Most often, setting the brake on a bicycle means that you need to place the brake pads at a desired distance from the rim or disc and symmetrical to each other. Also, you may need to pull the rope or adjust the brake lever. The brakes on your bike will be overwritten, and this prevents you ride? If the brakes are wedged or overwritten, the causes of the fault may be several. When you press the brake lever brake force is transmitted through the cable to the stocks that prizhimayutsya the rotor takes place immediately, friction and braking in the final result. Disc brakes for bicycles moved from motorcycles and cars, with some modifications, and special devices.

Bicycle Brake

The operating principle of the hydraulic brakes on a bicycle is to transfer hydraulic line pressure from the master cylinder to the brake caliper cylinder, which in turn moves the pads. Brake fluid is not compressed, so this system is more reliable and efficient than manual. Why creaking and whistling the brakes on a bicycle? At least once this question puzzled asks himself the owner of any bike. Adjusting the brakes on a bicycle is required in the case, if you press the brake lever stops the bike is too slow. This means that the sensitivity is set incorrectly. The fastest way to stop cycling - is to squeeze the front brake so hard that the rear wheel will be ready to get off the ground. In this case, the rear brake can not work effectively because of the lack of grip.

Adjusting the brakes bicycle

One of the main components of a safe and comfortable ride on the bike - it's the brakes! There are several types of bicycle brakes, which differ in structure. The lever compresses the two parts of the brakes, which are installed cartridge brake pads. The system of parallel supply pads provide good braking.